Industrial Roofing Services
Industrial roofing problems rarely give you much warning. A membrane failure, a blocked drain, or a leak that has been developing unnoticed can put equipment, inventory, and facility operations at risk faster than most people expect.
Our roofing team provides industrial roofing services for property owners and facility managers in Mississauga, Toronto, Brampton and Oakville, as well as St. Catharines and Niagara Falls in the Niagara Region. From new roof installations to urgent repairs, we assess each building’s condition and recommend work based on the facility’s specific requirements.
Need an industrial roofing contractor for your facility? Get in touch to discuss your project.
Industrial Roofing That Starts With Your Building, Not a Standard Package
An industrial roof does more than keep water out. It protects machinery, stored inventory, electrical systems, and the people working inside every day. When it starts to fail, the cost shows up quickly: repair bills, operational disruption, and sometimes damaged equipment or stock that nobody budgeted for.
We look at the building, find out what it actually needs, and recommend work based on that. If a targeted repair is the right call, that is what we recommend. If the system is past the point where repairs make financial sense, we will tell you that too, before work starts.
Our industrial roofing services cover everything from new installations on ground-up builds to emergency repairs on facilities with active leaks.
Our Industrial Roofing Services
Industrial facilities have different roofing needs depending on building age, roof system, operational environment, and weather exposure.
Industrial Roofing Installation
A new industrial roof needs to suit the building’s structure, drainage layout, insulation requirements, and what the facility is actually used for. We plan the full roof assembly around those factors before installation begins, accounting for rooftop equipment, structural load, and how the system will perform years down the line. Getting this right on a new build or major structural change saves money and headaches later.
Industrial Roof Repair
Leaks, membrane damage, deteriorating flashing, and separated seams are common on industrial roofs, especially on large-footprint buildings where problem areas can develop quietly for months. We find the source, assess how far the damage has spread, and carry out the repairs needed to stop further water getting in. What that involves depends on the roofing system, the extent of the damage, and what the surrounding materials look like.
Industrial Roof Replacement
Some roofs reach a point where repair is no longer the practical answer. Widespread deterioration, leaks that keep coming back, or structural damage that runs through the full assembly are all signs that a replacement will cost less in the long run than continuing to patch. We assess the existing system and walk you through the replacement options that fit the building’s condition and your operational requirements.
Industrial Roof Maintenance
Most roof problems on industrial buildings do not start as emergencies. They develop gradually at seams, flashings, penetrations, and drainage points, particularly on facilities with rooftop equipment or regular foot traffic on the roof. Scheduled maintenance catches these issues while they are still minor. We work with facility managers to set up a scheduled roof maintenance plan that fits the roofing system and the building’s needs.
Emergency Industrial Roof Repairs
An active leak or sudden roof damage on an industrial property needs attention the same day, especially when water is close to equipment, electrical systems, or production areas. Our team is available around the clock for emergency roofing response across the GTA and Niagara Region. Call 647-519-5447 and someone will pick up.
Not sure which service fits your situation? Describe the problem to our team and we will point you in the right direction.
Roofing Systems We Install and Repair on Industrial Buildings
TPO Roofing
A single-ply membrane used widely on low-slope industrial roofs. Heat-welded seams form a continuous bond that holds up well over time, and the reflective surface cuts down heat gain in large buildings where that matters to energy costs.
EPDM Roofing
A synthetic rubber membrane built for temperature extremes. EPDM handles Ontario’s freeze-thaw cycles well and holds up reliably on large-footprint industrial roofs over the long term.
PVC Roofing
Worth considering in industrial environments where chemical exposure or specific resistance requirements are part of the picture. PVC’s welded seams and resistance to certain pollutants make it a practical fit for the right application.
Modified Bitumen
A multi-layer asphalt-based system with built-in redundancy. Each additional ply adds more protection, which makes it a solid choice for industrial facilities where water intrusion simply cannot be tolerated.
Metal Roofing
For facilities where the roof needs to last as long as the building, metal is worth considering. A properly installed metal roof on an industrial building will outlast most membrane systems by a meaningful margin. After reviewing your facility and the project scope, our team can walk you through which system fits best.
Types of Industrial Facilities We Work On
Choosing the right contractor is just as important as selecting the right material. PWCR is trusted across the GTA for professional ACM panel installation. Here’s what makes clients choose us:
Warehouses and Distribution Centres
A leak in a warehouse or distribution centre moves fast through stored goods, packaging, and day-to-day operations. Staying ahead of roofing problems through timely repairs and planned maintenance keeps these facilities running without unexpected downtime.
Manufacturing Plants and Production Facilities
Manufacturing buildings usually have rooftop penetrations, ventilation systems, and equipment curbs that need careful handling during any roofing work. We coordinate around operational schedules and account for the specific features of the roof assembly before work begins.
Industrial Storage Facilities
Storage buildings carry the straightforward requirement of keeping everything inside dry and protected. Periodic condition checks help catch damaged areas, drainage issues, and early deterioration before they turn into bigger repair jobs.
Large Industrial Buildings
On a large roof, developing problems are easy to miss without a structured look at the full surface. A proper condition review covering drainage, seams, flashings, and penetrations gives facility managers a realistic picture of what needs attention now and what can wait.
Managing an industrial property that needs roofing work? Get in touch to discuss the building and your requirements.
Why Choose Province Wide Commercial Roofing for Industrial Roofing Services?
We Have Been Doing This Since 2004
Province Wide Commercial Roofing has been on industrial and commercial roofs across the GTA and Niagara Region for over 20 years. The crew that shows up at your facility has seen the failure modes, knows where water hides on large industrial roofs, and knows how to fix it properly. You can see examples of completed projects in our project portfolio.
Honest Assessments, Not Upsells
If a targeted repair is the right answer, that is what we recommend. We do not push replacement when repair makes more sense, and we do not recommend more scope than the building needs. What we find on the roof is what we tell you.
Clear Pricing Before Work Starts
You get a detailed scope and quote before anything moves forward. No vague estimates, no line items on the invoice that were not discussed. What we quote is what you pay.
Licensed, Insured, and Accountable
Fully licensed and insured for commercial and industrial roofing across the GTA and Niagara Region. Every project comes with documentation covering the scope completed, warranties, and maintenance guidance.
We Work Around Your Schedule
Production runs, delivery schedules, equipment access. We discuss all of it before the project starts and plan the work accordingly. Active facilities need industrial roofing contractors who understand that the building does not stop operating because a repair needs to happen.
Looking for experienced industrial roofers who show up, do the work, and stand behind it? Talk to our team.
How It Works
Tell Us About the Building and the Issue
Call us or fill out the form. Share what you are dealing with: an active leak, a roof that keeps needing repairs, a system that is getting old, or a new build that needs specification. That is enough to start.
We Assess the Roof
We come out and look at the building in person. Condition of the membrane, drainage, flashing details, penetrations, any areas of concern. We document what we find so the recommendation is based on the actual roof, not a general assumption.
We Give You a Clear Recommendation and Quote
Based on the assessment, we outline what the building needs and why: repair, replacement, a new installation, or a maintenance plan. You get a detailed quote with the full scope, materials, and cost before anything is approved.
We Do the Work
Scheduled around your facility’s operational requirements. Access, staging, and sequencing are coordinated with your team throughout.
Walkthrough and Handover
When the job is done, we walk the roof with you, confirm everything was completed as agreed, and hand over the warranty and maintenance documentation.
Areas We Serve for Industrial Roofing
We provide industrial roofing services in Mississauga, Toronto, Brampton and Oakville, as well as St. Catharines and Niagara Falls in the Niagara Region. Contact our team with your facility’s location and project requirements to confirm service availability.
Have a project in one of these areas? Tell us where your facility is and what the work involves.
Industrial Roofing FAQs
What does an industrial roofing company do differently from a general roofing contractor?
Industrial roofs are larger, more complex, and usually have more going on: rooftop equipment, large drainage systems, penetrations, and operational constraints that affect how and when work can happen. An experienced industrial roofing company understands how to assess large-footprint roofs properly, specify the right system for the facility, and coordinate work around an active building. That is a different skill set from general commercial work.
How do I know if my industrial roof needs repair or full replacement?
Isolated damage such as a seam separation, a flashing failure, or a puncture near a penetration is usually repairable. If you are seeing leaks in multiple locations, if repairs keep coming back within a season or two, or if the membrane has widespread surface degradation, replacement is likely the more cost-effective path. A proper site assessment is the only reliable way to know for your specific building.
Which roofing system is best for an industrial building?
There is no single answer. TPO, EPDM, PVC, modified bitumen, and metal each perform differently depending on the building’s structure, slope, drainage, what happens inside, and the local climate. Our team can walk you through the options that make sense for your facility after reviewing it.
How much does industrial roofing cost?
It depends on roof size, existing condition, the system being installed or repaired, site access, and the full scope of work. A repair on a single membrane section costs very differently from a complete tear-off and replacement on a large warehouse. Get in touch for a quote based on your actual building.
Can roofing work be done without shutting down our facility?
In most cases, yes. We discuss production schedules, access requirements, noise constraints, and anything else that affects operations before the project starts. Work is staged to keep disruption as low as possible. There are situations where certain phases need coordination around specific activities, and we work that out with your team in advance.
Do you provide ongoing maintenance for industrial roofs?
Yes. We work with facility managers across Mississauga, Brampton, Toronto, and the GTA to set up inspection and maintenance schedules suited to the roofing system and the building’s needs. Regular maintenance is the most cost-effective way to extend a roof’s service life.
How quickly can you respond to an emergency on an industrial property?
We are available around the clock for emergency roofing situations. For facilities across the GTA and Niagara Region, same-day response is our standard for urgent situations. Call 647-519-5447 and someone will pick up.
Ready to Talk About Your Industrial Roofing Project?
Whether you have an active problem that needs attention today or you are planning ahead for a system that is getting close to end of life, our team can help you work out the right approach.
Fill out the quote request form and we will get back to you the same day.